Glossary

PowerVM

PowerVM is IBM's virtualization layer for IBM Power servers. It lets AIX, IBM i and Linux run side by side on one machine and divides the processors, memory and adapters between them. It matters for AI work because the model usually runs in a Linux partition next to IBM i, and PowerVM is what creates and feeds that partition.

What it isIBM's virtualization layer for Power servers, built on the POWER Hypervisor
Operating systemsAIX, IBM i and Linux, running at the same time on one machine
Smallest processor slice0.05 processing units on FW760 firmware or later, down from 0.10
Why it matters for AIIt creates and feeds the Linux partition an AI model runs in, next to IBM i

What PowerVM does

Picture one Power server as a house and PowerVM as the wiring and plumbing behind the walls. It splits the house into separate apartments, runs power and water to each one, and keeps the tenants from stepping on each other. IBM's product page calls the result secure, scalable and high performance virtualization, and says it works with AIX, IBM i or Linux environments.

  • The POWER Hypervisor is the foundation. It sits below every logical partition and hands out processors, memory and virtual adapters.
  • It builds virtual adapters so partitions can connect without extra cables: virtual Ethernet, virtual SCSI for disk, virtual Fibre Channel and virtual consoles.
  • Micro-partitioning lets several partitions share the same physical cores instead of each one owning whole cores.
  • The Virtual I/O Server shares real disk and network adapters out to client partitions.
  • Live Partition Mobility moves a running partition to another server.
  • IBM's product page also names Resource Groups and Affinity Scoring to isolate workloads and enforce placement policies, Platform Key Store enhancements for memory management and encryption handling, and management through PowerVC and the Hardware Management Console.

Smallest slice of a processor one shared partition may use

FW740 firmware or earlier0.10 processing units
FW760 firmware or later0.05 processing units

Both numbers come from IBM's own shared processor documentation for Power, which states that the minimum number of processing units depends on the firmware level. A smaller floor means more partitions can share one core, so a small IBM i or Linux partition does not have to tie up a whole processor.

Is there more than one PowerVM edition?

Not anymore, in practice. IBM once sold PowerVM in editions, and the older wording still shows up inside its technical documentation. The separate Standard Edition product has been retired, and IBM's current PowerVM product page names no editions at all.

How PowerVM Standard Edition was retired

  1. November 9, 2018PowerVM Standard Edition 3.1.x became generally available. IBM's lifecycle page lists its program ID as 5765-VS3.
  2. August 8, 2023IT Jungle reports that IBM published announcement letter AD23-0282, the notice that trimmed the PowerVM and PowerVC line.
  3. October 10, 2023IBM's lifecycle page gives this as the end of market, the date PowerVM Standard Edition 3.1.x was withdrawn from marketing.
  4. April 30, 2026End of support for PowerVM Standard Edition 3.1.x on the same IBM lifecycle page, with extended support listed through April 30, 2028.

IBM's technical documentation has not caught up with its marketing. IBM still describes the Virtual I/O Server as part of the PowerVM Editions hardware feature, and partition mobility as a component of the PowerVM Enterprise Edition hardware feature. IT Jungle reported in August 2023 that all Power9 and Power10 servers are preconfigured with PowerVM Enterprise Edition, and that Standard was therefore no longer required. That last point is a trade press reading, not a sentence IBM published.

What is the Virtual I/O Server?

The Virtual I/O Server, or VIOS, is the piece of PowerVM that shares real hardware. One partition owns the physical disk and network adapters, and it hands slices of them to the other partitions. IBM's own words: the VIOS is software that is located in a logical partition, and this software facilitates the sharing of physical I/O resources between client logical partitions within the server. I/O is short for input and output, meaning disk and network traffic.

  • IBM lists what VIOS provides to client partitions: a virtual SCSI target for disk, virtual Fibre Channel, a Shared Ethernet Adapter for network traffic, and PowerVM Active Memory Sharing.
  • It means a small IBM i partition does not need its own physical cards. It borrows them.
  • project-pim, IBM's open tool for deploying an AI stack on Power, lists a minimum VIOS level of 4.1.1.0 on Power 10 and 4.1.1.00 on Power 11.

VIOS costs you a partition. IBM states plainly that a dedicated logical partition is required for the VIOS software solely for its use. Plan that partition in before you count how many partitions a server can hold.

Can you move a running IBM i partition?

Yes. IBM calls the feature partition mobility and splits it in two. The live version moves a partition that is still running, which is how a shop patches or replaces a server without a maintenance window. The cold version moves one that is already powered off.

The two kinds of partition mobility

ItemActive partition migrationInactive partition migration
Other name IBM usesLive Partition Mobility, or LPMCold partition mobility
State of the partitionRunning, with its applications still upPowered off before the move
Operating systems IBM namesAIX, IBM i and LinuxAIX, IBM i or Linux
Does anything shut down?No. IBM says the logical partition and the applications that are running on that migrated logical partition do not need to be shut down.The partition is already down, so there is nothing to stop.
What IBM files it underA component of the PowerVM Enterprise Edition hardware featureA component of the PowerVM Enterprise Edition hardware feature

IBM's PowerVM product page sums up the live version as moving running workloads between servers with zero planned downtime. An unplanned outage is a different subject and is not what this feature covers.

How does PowerVM help put AI next to IBM i?

IBM i does not run a large AI model itself. The model runs in a Linux partition on the same Power server, and IBM i reaches it over the network. Something has to build and feed that Linux partition, and that something is PowerVM. IBM's PowerVM product page says outright that it helps enterprises modernize legacy systems, deploy AI workloads and build hybrid clouds.

Four steps that put a model beside IBM i

  1. PowerVM splits the machineThe POWER Hypervisor divides one Power server into logical partitions. IBM i keeps its own partition, and a Linux partition is created next door.
  2. A tool builds the Linux partitionIBM's open project-pim describes itself as deploying an AI solution on IBM Power servers managed by a Hardware Management Console, for IBM i and Linux users, via bootc. bootc is short for bootable containers. The project creates a logical partition holding an AI stack image, attaches network and storage, then boots it.
  3. The Virtual I/O Server feeds itproject-pim lists a minimum Virtual I/O Server level of 4.1.1.0 on Power 10 and 4.1.1.00 on Power 11, alongside Hardware Management Console levels 1061 and 1110 and IBM i 7.5 and 7.6.
  4. IBM i calls the modelThe model stays in the Linux partition. IBM i reaches it over the network from its own partition on the same machine, so the two never share an operating system.

project-pim is an IBM GitHub project, not a priced IBM product with a support contract. Read its own minimum levels table before planning around it, because those levels move as new Power firmware and IBM i Technology Refresh levels ship.

IBM's own AI operations product lands on PowerVM too. An IBM Community post dated October 1, 2026 says IBM Power Autonomous Operations ships as a virtual appliance that runs on any IBM Power hypervisor, written in the post as a PowerVM LPAR, or directly as a Power Virtual Server instance. The ISO option loads through a Virtual I/O Server media library or an NFS mount, and the OVA option imports into the PowerVC image catalog. IBM's baseline is 2 entitled processor cores, shown as 4 virtual processors shared uncapped, with 32 GB of memory and 500 GB of storage. Those are IBM's figures from its own post, not an independent measurement.

Related Terms

Logical Partition (LPAR)

Splits one IBM Power server into separate virtual servers, each holding its own processors, memory and I/O devices, so IBM i, AIX and Linux can run side by side on the same machine. That split is how most IBM i shops add AI today: the model runs in a Linux partition next door and IBM i calls it over a web request.

Hardware Management Console (HMC)

The console that configures and controls IBM Power servers, including creating and managing the logical partitions that IBM i, AIX and Linux run in. For AI work it is the piece that builds the Linux partition a model runs in, and IBM now reads it back through an MCP server so an AI agent can ask it about open hardware errors.

IBM Power 11

IBM's current generation of Power processor and server hardware, announced July 8, 2025 and generally available July 25, 2025, carrying forward Power10's on-chip Matrix Math Acceleration and becoming the first Power generation to support the IBM Spyre Accelerator card.

IBM Power 10

IBM's Power processor generation that preceded Power11, announced August 17, 2020 and shipping from September 2021, the first Power chip to embed Matrix Math Acceleration into every core for on-chip AI inferencing without a separate GPU. IBM began winding down new Power10 sales in February 2026.

IBM i

IBM's operating system for Power servers running traditional AS/400-lineage business applications, with Db2 for i built directly into the OS.

IBM AIX

AIX is IBM's UNIX operating system for IBM Power hardware, the sibling of IBM i on the same servers and the source of the AIX runtime that IBM i ships as PASE for i. On Power 11 it needs AIX 7300-03-01 or higher to run in Power11 compatibility mode, and its AI packages arrive as RPMs from the AIX Toolbox for Open Source Software.

IBM Power Virtual Server (PowerVS)

IBM Power Virtual Server, or PowerVS, lets an IBM i shop rent IBM Power server capacity inside IBM's data centers instead of buying a box, and run the same AIX, IBM i and Linux partitions there. IBM describes it as a family of configurable, multitenant, virtual IBM Power servers with access to IBM Cloud services, web, DevOps and IBM Db2, which is how an IBM i partition ends up on the same cloud network as IBM Cloud AI services such as watsonx.ai.

Power Autonomous Operations

Power Autonomous Operations is IBM's AI agent for the Power systems underneath IBM i. It monitors, diagnoses and resolves capacity issues. GA September 23, 2026.

IBM Power S1112

IBM's entry-level, single-socket Power11 server, announced July 15, 2026 and generally available July 24, 2026, built for edge and branch AI inferencing with on-chip Matrix Math Acceleration. It is the first Power11 machine available in IBM i's low-cost P05 software tier.

IBM i 7.6

IBM i 7.6 is the current release of IBM's operating system for Power servers, generally available on 18 April 2025 under announcement letter AD25-0031. It is the first release to drop Power 9 and earlier: IBM supports it only on Power 11 processors, or on Power 10 processors at minimum firmware level FW1060, so moving to 7.6 and moving to AI capable hardware are the same purchase.

vLLM

An open source server that keeps a large language model loaded and answers requests over an OpenAI style API, with PowerPC CPUs on its supported hardware list. That lets an IBM i shop run a model in a Linux partition on the same IBM Power server as its production workload, and Red Hat ships a generally available vLLM container image for ppc64le in Red Hat AI Inference 3.5.0.