Glossary

IBM Software Hub

Software Hub

IBM Software Hub is the platform layer a Power shop installs first when it wants IBM watsonx software running on its own hardware instead of in IBM's cloud. It is the renamed platform core of IBM Cloud Pak for Data, it runs on a Red Hat OpenShift cluster, and IBM's Version 5.4 hardware requirements say it supports PowerVM capable Power9, Power10 and Power11 on ppc64le.

What it isThe platform layer that installs and manages IBM containerized data and AI software on Red Hat OpenShift
Older nameThe platform core of IBM Cloud Pak for Data; the Software Hub name applies from Version 5.1
Power supportPowerVM capable Power 9, Power 10 and Power 11, on ppc64le Linux partitions
Current version5.4, announced June 24, 2026

What is IBM Software Hub?

Think of a shopping mall. The mall owner supplies the doors, the lights, the security desk and the map by the entrance. Each store moves in and sells its own thing. IBM Software Hub is the mall. IBM's watsonx and Cloud Pak software are the stores. IBM's product page describes it as a unified interface for discovering, deploying and managing IBM containerized software on Red Hat OpenShift. You install the hub once, then pick services from its catalog.

IBM's planning documentation calls it a modular platform for running various solutions and services, made of integrated microservices that run on a multi-node Red Hat OpenShift cluster. OpenShift is Red Hat's software for running containers across a group of servers. The shared part of the hub is called the control plane, which IBM describes as a light-weight installation that provides a command-line interface, an administration interface, a services catalog and the central user experience. Install more than one hub and you install a control plane in each OpenShift project.

Why did the name change from Cloud Pak for Data?

The same platform, before and after the name change

QuestionBefore Version 5.1Version 5.1 and later
Name on the productIBM Cloud Pak for DataIBM Software Hub
Version IBM names in the upgrade guideVersion 4.8Version 5.1
What the name coversThe platform and its services under one nameThe platform itself, with watsonx and Cloud Pak listed as software it supports
What it runs onRed Hat OpenShiftRed Hat OpenShift, unchanged

Read from the IBM Software Hub product page and the IBM Documentation page Upgrading to IBM Software Hub on November 18, 2026, which states: To upgrade an instance of IBM Cloud Pak for Data Version 4.8 to IBM Software Hub Version 5.1, you must upgrade the required operators and custom resources for the instance. Table rows are not linked because this site's content blocks render as plain text.

The effect for a buyer is simple. Cloud Pak for Data is no longer the thing you install first. The hub is. Cloud Pak for Data and the watsonx services sit on top of it, which is why IBM's license page for Version 5.4 is titled License information for IBM Software Hub 5.4 and related services. watsonx Code Assistant is one of those services: its install page says an instance administrator can install watsonx Code Assistant on IBM Software Hub Version 5.4.

Can IBM i run it?

No, and that is not a gap in the product. The hub needs a Red Hat OpenShift cluster, and OpenShift nodes on IBM Power run Linux built for ppc64le, the little-endian 64-bit Power build of Linux. IBM i is a different operating system. So the hub lives in Linux partitions on the Power server, beside the IBM i partition, not inside it. A partition is a slice of one physical server, carved out by PowerVM. The IBM i side keeps the data, the files and the business programs. The Linux side runs the models and the agents.

IBM's own AI on IBM i guide makes the same split for watsonx Orchestrate. It marks the question Runs on IBM i with a no, marks on premises with a yes, and says all options support hybrid scenarios where IBM i workloads stay on premises while orchestration is managed centrally. For reaching the IBM i side it points at the IBM i MCP Server to give agents native access to SQL, IFS, CL commands and system objects. MCP stands for Model Context Protocol. IFS is the Integrated File System and CL is Control Language, IBM i's command language.

What hardware does it need on Power?

Virtual processors per node in a highly available cluster on ppc64le

Worker node16 vCPU
Control plane node4 vCPU
Infra node4 vCPU
Load balancer node2 vCPU

From the ppc64le hardware requirements page for IBM Software Hub 5.4, read November 18, 2026. A vCPU is a virtual processor assigned to a partition. These are baseline numbers, not a finished sizing. IBM states that if you install only a few services with small vCPU and memory requirements you might not need additional resources, but if you plan to install multiple services or services with large footprints you should add the appropriate amount of vCPU and memory to the minimum recommendations.

Two ways IBM sizes the cluster on Power

QuestionHighly available clusterSingle Node OpenShift
Worker nodes3 or more1
Each worker node16 vCPU and 64 GB RAM, 128 GB recommended16 vCPU and 64 GB RAM, 300 GB disk
Other machines3 control plane nodes, 3 infra nodes, 2 load balancer nodes1 bastion machine, 4 vCPU and 8 GB RAM, 500 GB disk

Same source page, read November 18, 2026. IBM also recommends that you configure logical partitions to run with the native compatibility mode to improve performance. Table rows are not linked because this site's content blocks render as plain text.

What is limited on Power?

  • Supported processors are PowerVM capable Power 9, Power 10 and Power 11.
  • watsonx.data is not supported on Power 9. It needs Power 10 or Power 11.
  • Watson Machine Learning users cannot use, run or deploy assets based on GPU runtimes on Power hardware. A GPU is a graphics processing unit, the chip most large models run on.
  • The Spark Labs development environment cannot be used on ppc64le hardware.

That list comes from the ppc64le hardware requirements page for Version 5.4 and is version specific. Which services run on Power, and which run with fewer features, changes release by release, so read the page for the exact version you are installing before you order hardware. The no GPU limit is the one that bites hardest on a Power shop: it does not stop you running the hub, but it narrows what Watson Machine Learning can serve from it.

Related Terms

watsonx.ai

The studio component of watsonx for building, tuning, and deploying foundation models and generative AI applications, including retrieval-augmented generation (RAG) against enterprise data.

watsonx Orchestrate

IBM's AI agent and automation platform for orchestrating multi-step business workflows across enterprise applications. Since August 2026 it can launch IBM Bob from its Create an agent dialog through a Build with Bob preview, but it still ships no IBM i or Db2 for i connector.

watsonx.data

The open, hybrid data-lakehouse component of IBM's watsonx platform, generally available since July 2023, whose documented data sources include a native IBM Db2 for i connection for querying and cataloging IBM i data.

watsonx Code Assistant for i

IBM's November 2025 preview announcement of an AI code assistant purpose-built for RPG on IBM i. The preview track was superseded by IBM Bob, which reached general availability in March 2026.

ppc64le

The name Linux, Red Hat packages, container images and Python wheels use for a 64-bit IBM Power processor running in little endian byte order, and the word an IBM i shop has to match when it installs AI software on Power hardware. IBM i itself is not ppc64le, so a ppc64le build runs in a Linux partition on the same Power server, never inside IBM i or PASE.

PowerVM

PowerVM is IBM's virtualization layer for IBM Power servers. It lets AIX, IBM i and Linux run side by side on one machine and divides the processors, memory and adapters between them. It matters for AI work because the model usually runs in a Linux partition next to IBM i, and PowerVM is what creates and feeds that partition.

Logical Partition (LPAR)

Splits one IBM Power server into separate virtual servers, each holding its own processors, memory and I/O devices, so IBM i, AIX and Linux can run side by side on the same machine. That split is how most IBM i shops add AI today: the model runs in a Linux partition next door and IBM i calls it over a web request.

IBM Power 11

IBM's current generation of Power processor and server hardware, announced July 8, 2025 and generally available July 25, 2025, carrying forward Power10's on-chip Matrix Math Acceleration and becoming the first Power generation to support the IBM Spyre Accelerator card.